ROMEAS 85.12 RM1200D
Manual corrugation measuring system
For recording the longitudinal rail profile and weld joint control (measuring section = 1200 mm) before/after rail processing.
- Digital measuring system
- Evaluation of weld seams
- Verification and acceptance of reprofiling work
- Numerical graphical representation of the measured values and results
- Equipped with an 8″ outdoor tablet (Windows OS) and user-friendly measurement program with integrated data analysis
- DB user acceptance
- Meets requirements of EN 13484-4:2011
The digital measuring system listed here is available on request through our ROBEL Holding partner “Vogel & Plötscher”.
Further information and possible accessories can be found in the product sheet.
| Request now |
* required fields
Discover More
ROMEAS 82.05
Arrow height measuring device
ROMEAS 82.07 VIG1300
Sighting and leveling device
ROMEAS 82.11 SQUARE
track angle
ROMEAS 83.20 GG718
Stock rail and switch tongue test gauge
ROMEAS 83.87 PLAT
Clearance gauge
For measuring the distance between centre of track and platform (ramp) and for measuring the height from top of rail to platform edge, including track gauge and cross level measurements.
- Insulated from rail to rail
- 2 level measuring blocks (to platform edge)
- Storage of level measuring blocks in transport tube
Further information and possible accessories can be found in the product sheet
ROMEAS 85.05
Rail length measuring wheel
For measuring the lengths of rail sections.
- Available in the measurement tolerances “Standard” (under 0,05%) and “Precision” (under 0,02%)
- Counter above the running wheel (also counts backwards)
- For rail profiles 49E1, 54E3, 60E1
Further information and possible accessories can be found in the product sheet
ROMEAS 85.07 SA75
Track spacing measuring device
ROMEAS 85.08 PML
Laser-based cross-section measurement system
Automatic recording (including evaluation) of the rail cross-section before/after rail processing.
- Laser-based measurement of the rail cross-section
- Determination of the quantity removed
- Real-time data collection and analysis in seconds
- Comparison of the actual profile to many different target rail profiles
- Comparison of measurements before/after rail processing
- Complies with EN 13231-2:2020
- Integrable into processing machines
- For Vignoles rails (Variant V)
- Optionally also for grooved rails (variant VG)
- Track gauge-independent use
The digital measuring system listed here is available on request through our ROBEL Holding partner “Vogel & Plötscher”.
Further information and possible accessories can be found in the product sheet.