ROMEAS 83.20 GG718
Stock rail and switch tongue test gauge
For correct and safety-relevant checking and measuring of wear spots in the switch blade area.
- Available as a standard version and as a DB version
- Insulated from rail to rail
- With test gauge
- DB user acceptance
Further information and possible accessories can be found in the product sheet
| Request now |
* required fields
Discover More
ROCLAMP 68.05
Rail Clamp
For a positive and secure connection of two rail ends.
- At insulated joints, fractured rails and detected rail defects, from prevention to repair. Used worldwide.
- Different versions for various rail types
- Can also be deployed for thermite welding
- Track remains open for traffic thanks to quick installation
- High passing speed, depending on rail defect
- Patented safety latch
- Easy to use thanks to compact design and minimum excavation of ballast
Further information and possible accessories can be found in the product sheet
ROMEAS 82.05
Arrow height measuring device
ROMEAS 82.07 VIG1300
Sighting and leveling device
ROMEAS 82.11 SQUARE
track angle
ROMEAS 83.07 RCA
Analog track gauge and superelevation measuring device
ROMEAS 83.87 PLAT
Clearance gauge
For measuring the distance between centre of track and platform (ramp) and for measuring the height from top of rail to platform edge, including track gauge and cross level measurements.
- Insulated from rail to rail
- 2 level measuring blocks (to platform edge)
- Storage of level measuring blocks in transport tube
Further information and possible accessories can be found in the product sheet
ROMEAS 85.01 SKM
Railhead wear measuring device
ROMEAS 85.08 PML
Laser-based cross-section measurement system
Automatic recording (including evaluation) of the rail cross-section before/after rail processing.
- Laser-based measurement of the rail cross-section
- Determination of the quantity removed
- Real-time data collection and analysis in seconds
- Comparison of the actual profile to many different target rail profiles
- Comparison of measurements before/after rail processing
- Complies with EN 13231-2:2020
- Integrable into processing machines
- For Vignoles rails (Variant V)
- Optionally also for grooved rails (variant VG)
- Track gauge-independent use
The digital measuring system listed here is available on request through our ROBEL Holding partner “Vogel & Plötscher”.
Further information and possible accessories can be found in the product sheet.