Product Search
ROALIGN 47.230
Hydraulic track lifting machine with swiveling device
For lifting and lining tracks or entire track panels.
- High lifting capacity and slewing force
- For lifting and straightening ballasted and non-ballasted track yokes (when tamping the tracks)
- For lifting rails, for example to replace rail pads
- Radio remote control enables operation outside the danger zone
- Built according to EN 15955
Further information and possible accessories can be found in the product sheet
ROBATTERY 71.01
400 & 800 Wh (43 V)
High-performance battery technology meets reliable mechanics. Clean, quiet and powerful operation.
- Powerful batteries specially developed for railway construction
- Very temperature resistant
- Durable aluminum housing
- Machine ready for use at the touch of a button
- Flexible battery performance classes selectable
- Battery packs, charger and machines can be combined
- Easy-to-read charge level indicator
- Low noise
- Without exhaust fumes, odor nuisance or pollution
- Suitable for tunnels and urban areas
- Long-lasting battery cells
- Maintenance-free batteries
- Battery take-back and recycling by ROBEL
Further information and possible accessories can be found in the product sheet
ROBATTERY 71.02
2300 Wh (50 V)
High-performance battery technology meets reliable mechanics. Clean, quiet and powerful operation.
- Powerful batteries specially developed for railway construction
- Very temperature resistant
- Durable aluminum housing
- Machine ready for use at the touch of a button
- Flexible battery performance classes selectable
- Battery packs, charger and machines can be combined
- Easy-to-read charge level indicator
- Low noise
- Without exhaust fumes, odor nuisance or pollution
- Suitable for tunnels and urban areas
- Long-lasting battery cells
- Maintenance-free batteries
- Battery take-back and recycling by ROBEL
Further information and possible accessories can be found in the product sheet
ROBEND 22.28
switch tongue straightening device
ROBEND 22.38
Hydraulic rail bending machine
ROBOLT 31.82
Tab screw device
ROBORE 11.12
Portable sleeper drilling machine
For efficient drilling of wooden and synthetic sleepers.
- Light and compact sleeper drilling machine
- Easy handling due to light-weight design
- Engine speed controlled by hand throttle lever
- Depth stop can be adjusted on scale quickly and without the use of any tools
- Drill bit can be changed swiftly and without the use of any tool
- Lockable drill spindle
- Safe and ergonomic
Further information and possible accessories can be found in the product sheet
ROBORE 11.20 E³
Cordless threshold drill
Portable sleeper drilling machine for quick and easy drilling of wooden and synthetic sleepers.
- Light and compact sleeper drilling machine
- Universally adjustable for right- and left-handed people (Version 01)
- Depth stop can be adjusted on scale quickly and without the use of any tools
- Emission-free and safe
- Note: The sleeper drill can be operated with the Milwaukee M18 FUEL ONE KEY 1" cordless impact wrench with snap ring (not included).
Further information and possible accessories can be found in the product sheet
ROCARRY 25.16
Rail support roller
ROCARRY 42.02
Rail carrying clamp
ROCARRY 42.10
Rail roller support clamp
ROCARRY 42.11
Rail support clamp
ROCARRY 42.22
Rail carrying clamp with suspension eyelet
ROCARRY 42.25
Rail roller support clamp
ROCHOCK 59.09
Wheel spacer
Various wheel chock designs.
- Press-on wheel chock: Makes coupling process easier by preventing long-coupled wagon formations from decoupling in departure tracks
- Wheel chocks L130: Secures stationary wagons from unintended movement
- Wheel chocks L134: For securing stationary freight wagons
Further information and possible accessories can be found in the product sheet
ROCLAMP 68.05
Rail Clamp
For a positive and secure connection of two rail ends.
- At insulated joints, fractured rails and detected rail defects, from prevention to repair. Used worldwide.
- Different versions for various rail types
- Can also be deployed for thermite welding
- Track remains open for traffic thanks to quick installation
- High passing speed, depending on rail defect
- Patented safety latch
- Easy to use thanks to compact design and minimum excavation of ballast
Further information and possible accessories can be found in the product sheet
ROCLIP 34.01 E³
Battery-powered clipper
For emission-free insertion and extracting Fastclip clip fasteners in new construction and maintenance. With sleeper lifting unit.
- Approx. 90 min clipping time per battery charge (depending on material, operator etc.)
- Easy and quick lifting of low-lying sleepers
- LED lighting
Further information and possible accessories can be found in the product sheet
ROCLIP 34.01
Clip machine
For inserting and extracting Fastclip clip fasteners in new construction and maintenance.
- Wide range of applications
- Removes even heavily corrodes clips
- Fast changeover without tools between insertion and extraction mode
- LED lighting
- Easy operation
- Protection of the insulators
Further information and possible accessories can be found in the product sheet
ROCLIP 34.02
Modular clipping machine
For inserting and extracting clip fasteners in new construction and maintenance.
- Choice between two different drive units
- High throughput
- Protection of the insulators
- Modular design: consisting of base frame, clip head, drive unit and transverse bogie
- 2-hand operation
- User-friendly and safe
- Optimum view of work area due to LED lighting
Further information and possible accessories can be found in the product sheet
ROCLIP 34.90
Clip device
ROCONVERT 72.01 E³
Battery conversion kit
Easy conversion from combustion engine to electric motor, the alternative to new investment.
- Electric motor ideal for tunnels and urban areas
- High flexibility thanks to various types of drive
- Cost savings from conversion instead new purchase
- Increased availability due reduced drive maintenance
- No exhaust fumes, reduced noise emissions, reduced hand-arm vibrations
Further information and possible accessories can be found in the product sheet
ROCOUPLE 58.03
Coupling rods
ROCOUPLE 58.62
Coupling rods
ROCUT 13.70
Rail cutting grinder
For fast and efficient cutting of maximum strength rails.
- Short cutting times
- Sturdy and light aluminum guide frame
- Clamping device adjustable to rail type
- With kerf indicator for accurate determination of cutting point
- Relieves the operator thanks to supporting spring on the guide arm
Further information and possible accessories can be found in the product sheet
ROCUT 13.86
Rail cutting grinder
For fast and efficient cutting of maximum strength rails.
- Rail can be cut from both sides without changeover
- Relieves the operator thanks to supporting spring on the guide arm
- Precise positioning at the cutting point due to kerf indicator
- Centrifugal clutch
- Spark protection of cutting disc continuously adjustable
Further information and possible accessories can be found in the product sheet
ROCUT 13.90 E³
Electrical Rail Cutter
For fast and efficient cutting of maximum strength rails.
- Lightweight and sturdy rail cutter due to light-weight aluminum construction
- Rails can be cut from both sides with sparks controlled downwards without changeover
- Multi Drive Technology
- Integrated LED performance display for cut monitoring
- LED lighting
- Cutting rate approx. 20 cuts on 60E1 rail per battery charge (depending on cutting disc, operator, etc.)
Further information and possible accessories can be found in the product sheet
RODERAIL 59.11
double brake shoe
RODERAIL 59.12
Double-sided track shoe
RODRILL 10.20 E³
Battery-powered rail drilling machine
Easy, efficient and emission-free rail drilling.
- Short drilling time, reliable result
- Drilling time of approx. 12-60 seconds depending on rail type
- Light and compact machine
- Ergonomic thanks to low hand-arm vibration
- Optionally with quick-release device - assembly/disassembly in under three seconds
- Economical coolant consumption
Further information and possible accessories can be found in the product sheet
RODRILL 10.40
Rail drilling machine
ROFACE 16.01
rail milling machine
For the milling of frogs and rails.
- Controlled removal of material for all types of crack and damage
- Uniform machining of damaged areas without application of heat
- Milling of drainage grooves in grooved rails possible
- Low repair costs
- Modular design and easy handling
Further information and possible accessories can be found in the product sheet
ROGAUGE 24.06
lane keeping rod
ROGRIND 13.45MD E³
weld joint grinding machine
For grinding welding joints and for reprofiling the complete rail head, also in switches and for grooved rails and crane rails.
- Choice between battery power or power pack
- Interchangeable guiding system for different areas of application
- Ideal for use in tunnels and urban areas
- Light-weight machine, powerful grinding
- At least 60 minutes of continuous grinding per battery charge (depending on rail profile, trimmer, grinding disc etc.)
Further information and possible accessories can be found in the product sheet
ROGRIND 13.45RS
Rail grinding machine
For precise grinding of welding joints and for reprofiling the complete rail head. Can also be used in switches, for frogs and for grinding grooved rails.
- Excellent view of the cup wheel and rail
- High availability of the machine thanks to durable clutch
- Side stand for safe placement of machine (for variant with left-hand guide handle)
- Low maintenance of the machine
Further information and possible accessories can be found in the product sheet
ROGRIND 13.45SKS
Railhead grinding machine
The grinding machine for reprofiling the rail head. Accurate and precise.
- Can be used for all common types of rail due to adjustable spacing of guide discs to various rail head widths
- Machine specially adapted to operator
- Adjustment of spindle resistance without tools
- Easy changing of cup wheel thanks to Quick Lock
- Digital hour meter/rev counter
Further information and possible accessories can be found in the product sheet
ROGRIND 13.45WBF
weld joint grinding machine
For precise grinding of welding joints and for reprofiling the complete rail head. Can also be used in switches and for grinding grooved rails.
- Convenient to use, individual format
- Easy changing of cup wheel thanks to Quick Lock
- Side stand for safe placement of machine (for variant with left-hand guide handle)
- Rotational resistance can be adjusted without the use of any tools
Further information and possible accessories can be found in the product sheet
ROGRIND 13.48
Railhead contour grinding machine
For true-to-form grinding of the rail head after welding work to restore a perfect profile.
- 100% copy of the rail profile due to special copying device
- Simple operation in ergonomic working position
- More safety due to optional equipment
- For thermite and flash welding
Further information and possible accessories can be found in the product sheet
ROGRIND 13.49 E³
Hybrid railhead contour grinding machine
One machine. Three modules. Precise grinding pattern in the shortest possible working time with intelligent energy use.
- High grinding quality and clear view of the grinding area due to compact, low-vibration electric motor
- Patented ROBEL finish-grinding procedure for localised reworking
- Excess energy stored during idling of grindstone, released during load peaks
- Other drive versions (battery, power pack) available
- Comfortable handling of the machine due to ergonomic telescopic handles, individually adjustable
- High occupational safety
Further information and possible accessories can be found in the product sheet
ROGRIND 13.63
Modular rail and switch grinding machine
For grinding of built-up welds on switch blades, frogs, stock rails and check rails as well as deburring of rail heads and in switches.
- The machine can be used for all common grinding and reprofiling work, especially in switches
- Fast changeover of grinding modules without tools
- Low space requirement during transport and storage
- User-friendly and safe
- Wide range of applications
- Precisely ground face due to stable guidance and central feed of grinding units
- At least 60 minutes of continuous grinding possible with BLDC electric motor (depending on rail profile, trimmer, grinding disc, etc.)
- Twist resistant
Further information and possible accessories can be found in the product sheet
RAW HEAT 66.01
Rail heater
To create the nominal rail temperature for length compensation before welding. Available in different versions.
- High heat output
- Low gas consumption with constant heat output
- Protection of the superstructure from excessive heat thanks to adjustable burner spacing
- Valves and coupling suitable and tested for the application required in the liquid phase and for operation
- High ergonomics and simplified logistics
- Different versions available
Further information and possible accessories can be found in the product sheet
ROHORN 69.13
Harmony signal horn
ROHORN 69.15
Multi-tone signal horn
ROJACK 46.43/46.45/46.47/46.50
Track lifting winch with safety crank
For lifting and lowering loads such as track panels or rails.
- Solid and robust design
- Safety crank handle with load pressure brake and folding handle
- Compliant with Accident Prevention Guidelines for Winches, Lifting and Pulling Devices, BGV D8 (EN 45000)
Further information and possible accessories can be found in the product sheet
ROJACK 47.14
Profile-free, mechanical track lifter
ROJACK 47.17
Profile-free, hydraulic track lifter
For continuously adjustable and precise lifting of rails and switches.
- Lightweight, robust and compact design
- Easy operation
- Quick-action lowering mechanism
- Different versions available
- With pressure relief valve that prevents damage to the track jack in case of overload
Further information and possible accessories can be found in the product sheet
ROJOINT 68.61
rail starting tab
ROJOINT 68.61
rail connecting strap
ROLAX 26.01
Rail tensioning machine
To remove stresses from the rail and establish the nominal length of the rail by striking the rail head on both sides.
- Precise and powerful
- Height-adjustable hammers
- LED lighting on both sides
- Can be operated in both directions
- Easily lockable guard in work area
- Emergency stop button and deadman‘s brake on both sides
Further information and possible accessories can be found in the product sheet
ROLIFT 40.05
rail lifting device
For lifting and fixing rails.
- To be used for replacing rail pads and grooved base plates
- For all types of track used
- For rail profiles 49E1, 54E3 and 60E1, others available on request
- Hand lever equipped with beyond-dead-centre safety device
Further information and possible accessories can be found in the product sheet
ROLIFT 43.25
Hydraulic rail lifting device
For lifting flat bottom rails e.g to replace rail pads and ribbed plates.
- Modular system consisting of rail lifting device and drive unit
- Choice of drive unit with ROBEL battery or combustion engine
- With deadman's brake
- Hydraulic & electrical safety device
- No collision in the clearance gauge and in the switch
Further information and possible accessories can be found in the product sheet
ROLIFT 69.20
threshold lifting device
ROLIGHT 73.06
Construction site lighting system
ROLIGHT 73.20
Construction site lighting system
ROLLY 50.17
Ergonomic trolley
Support trolley with lifting device for ROBORE sleeper drilling machines (ROBORE 11.12/11.20 E³) for ergonomic use when drilling synthetic or wooden sleepers.
- With deadman‘s brake as standard
- Operator is relieved during drilling and moving, increased productivity
- Divisible
- Holding device can be quickly and easily moved to the second rail
Further information and possible accessories can be found in the product sheet
ROLLY 51.12
conveyor wagon
ROLLY 52.16
Transport device
Transports long-welded rails, track construction equipment, tools and track components.
- Safe transport on four-wheel trolley
- Available in different versions
- Available for different track gauges
- Combination of up to four devices using connecting rods
Further information and possible accessories can be found in the product sheet
ROLLY 52.30
Transport device
ROLOAD 40.51
Rail loading and transport equipment
Safe transport on four-wheeled chassis with rail loader and trolley.
- Transport of rails, through the combination of up to four units by means of draw bars
- Travels through curve radii of up to 50 m
- Parking brake
- Can be used with trailer couplings and connecting rods on both sides
Further information and possible accessories can be found in the product sheet
ROMEAS 82.05
Arrow height measuring device
ROMEAS 82.06
Arrow height measuring device
For easy checking and determination of versine values in a track curve.
- Independent of clearance gauge
- Can be used for all common rail types
- Measuring chord can be adjusted to rail height as well as in lateral direction
- Easy fastening at the foot of the rail
Further information and possible accessories can be found in the product sheet
ROMEAS 82.07 VIG1300
Sighting and leveling device
ROMEAS 82.11 SQUARE
track angle
ROMEAS 83.07 RCA
Analog track gauge and superelevation measuring device
ROMEAS 83.15 POINT
Track fixed point measuring device
For measuring distances between fixed points at the track and signal posts, concrete walls, etc. and for checking individual level values using an appropriate measuring staff.
- Attached to the rail by magnets
- Exact position adjustable via a level
Further information and possible accessories can be found in the product sheet
ROMEAS 83.18 MK150
butt gap measuring wedge
ROMEAS 83.20 GG718
Stock rail and switch tongue test gauge
ROMEAS 83.37 RCS
Analog track and superelevation measuring device
ROMEAS 83.40 MESSREG PTP II
Manual switch inspection system
Digital measuring system for the point-by-point measurement and evaluation of switches and track sections.
- Digital measuring system
- Equipped with an 8" outdoor tablet (Windows OS)
- User-friendly software with menu-driven measurement process
- Recording of measurement points at the touch of a button
- Automatic saving and direct result display (including tolerance violations)
- DB user acceptance
- Meets requirements of EN 13484-4:2011
The digital measuring system listed here is available on request through our ROBEL Holding partner “Vogel & Plötscher”.
Further information and possible accessories can be found in the product sheet.
ROMEAS 83.41 MESSREG CDM
Mobile track and switch inspection system
Comprehensive measurement (including immediate evaluation) of switches and tracks with automatic continuous data acquisition every 5 mm.
- Digital measuring system
- Menu-driven measurement process with real-time display of measurement progress and current measured values
- Automatic saving and direct result display (including tolerance violations)
- Comment function for precisely noting structural features or track defects during the measurement process
- Equipped with a powerful 10" outdoor notebook and a comprehensive software package
- DB user acceptance
- Meets requirements of EN 13484-4:2011
The digital measuring system listed here is available on request through our ROBEL Holding partner “Vogel & Plötscher”.
Further information and possible accessories can be found in the product sheet.
ROMEAS 83.50 RCAD
Digital track gauge and superelevation measuring device
For all common measuring points in switches and tracks.
- Precise, digital measurement @ 0.1 mm resolution
- Central, backlit measurement display
- Insulated from rail to rail
- Add-ons for extra features available
- DB user acceptance
Further information and possible accessories can be found in the product sheet
ROMEAS 83.87 PLAT
Clearance gauge
For measuring the distance between centre of track and platform (ramp) and for measuring the height from top of rail to platform edge, including track gauge and cross level measurements.
- Insulated from rail to rail
- 2 level measuring blocks (to platform edge)
- Storage of level measuring blocks in transport tube
Further information and possible accessories can be found in the product sheet
ROMEAS 84.15 MESSREG CTS II
Mobile track measuring system
Comprehensive measurement of tracks with automatic continuous data acquisition every 100 mm.
- Digital measuring system
- Numerical graphical representation of the measured values and measurement progress in real time
- Comment function for precisely noting structural features or track defects during the measurement process
- Comment function for precisely noting structural features or track defects during the measurement process
- Equipped with an 10" outdoor tablet (Windows OS)
- Meets requirements of EN 13484-4:2011
The digital measuring system listed here is available on request through our ROBEL Holding partner “Vogel & Plötscher”.
Further information and possible accessories can be found in the product sheet.
ROMEAS 85.01 SKM
Railhead wear measuring device
ROMEAS 85.02 MP
Measuring point probe
ROMEAS 85.05
Rail length measuring wheel
For measuring the lengths of rail sections.
- Available in the measurement tolerances “Standard” (under 0,05%) and “Precision” (under 0,02%)
- Counter above the running wheel (also counts backwards)
- For rail profiles 49E1, 54E3, 60E1
Further information and possible accessories can be found in the product sheet
ROMEAS 85.07 SA75
Track spacing measuring device
ROMEAS 85.08 PML
Laser-based cross-section measurement system
Automatic recording (including evaluation) of the rail cross-section before/after rail processing.
- Laser-based measurement of the rail cross-section
- Determination of the quantity removed
- Real-time data collection and analysis in seconds
- Comparison of the actual profile to many different target rail profiles
- Comparison of measurements before/after rail processing
- Complies with EN 13231-2:2020
- Integrable into processing machines
- For Vignoles rails (Variant V)
- Optionally also for grooved rails (variant VG)
- Track gauge-independent use
The digital measuring system listed here is available on request through our ROBEL Holding partner “Vogel & Plötscher”.
Further information and possible accessories can be found in the product sheet.
ROMEAS 85.11 RMF1100
Mobile corrugation measuring system
Automatic continuous recording of the longitudinal profile of the left and right rails (simultaneously) before/after rail processing.
- Digital measuring system
- Evaluation of weld seams
- Acceptance of reprofiling work
- Numerical graphical representation of the measured values and measurement progress in real time
- Comment function for precisely noting structural features or track defects during the measurement process
- Equipped with a 10" outdoor notebook and user-friendly measurement program with integrated data analysis
- DB user acceptance
- Meets requirements of EN 13484-4:2011
The digital measuring system listed here is available on request through our ROBEL Holding partner “Vogel & Plötscher”.
Further information and possible accessories can be found in the product sheet.
ROMEAS 85.12 RM1200D
Manual corrugation measuring system
For recording the longitudinal rail profile and weld joint control (measuring section = 1200 mm) before/after rail processing.
- Digital measuring system
- Evaluation of weld seams
- Verification and acceptance of reprofiling work
- Numerical graphical representation of the measured values and results
- Equipped with an 8" outdoor tablet (Windows OS) and user-friendly measurement program with integrated data analysis
- DB user acceptance
- Meets requirements of EN 13484-4:2011
The digital measuring system listed here is available on request through our ROBEL Holding partner “Vogel & Plötscher”.
Further information and possible accessories can be found in the product sheet.
ROMEAS 85.15 RM150 HR
Measuring system for rail surface quality
Automatic continuous measurement and determination of rail surface quality (index QI) before/after rail processing.
- Digital measuring system
- High-precision data acquisition with a measurement resolution of 0,1 µm
- Numerical graphical representation of the measured values and results
- Quality verification of the railway running surface according to quality index [QI] for the acceptance of reprofiling work
- Equipped with an 8" outdoor tablet (Windows OS) and user-friendly measurement program with integrated data analysis
- DB user acceptance
- Meets requirements of EN 13484-4:2011
The digital measuring system listed here is available on request through our ROBEL Holding partner “Vogel & Plötscher”.
Further information and possible accessories can be found in the product sheet.
ROMEAS 85.16 RSCM
Rail defect testing system
RSCM is an innovative testing system for identifying and evaluating rail surface defects (e.g., head checks, squats, cracks).
- Detection and assessment of rail defects up to a depth of 7 mm
- Unique and innovative technology based on magnetic flux leak testing
- Automatic continuous measurement
- Analysis of the entire rail head
- Simple and immediate data analysis via "heatmap"
- Ideal complement to ultrasound measurement
- DB user acceptance
- Complies with EN 61000-6:2017
The digital measuring system listed here is available on request through our ROBEL Holding partner “Vogel & Plötscher”.
Further information and possible accessories can be found in the product sheet.
ROMEAS 85.20
Rail-mounted thermometer
ROMOVE 43.02
Rail transfer device
For lifting rails and moving rails longitudinally and laterally.
- Consists of 2 supports, 1 cross beam, 1 travelling crab and 1 roller carrying tongs
- Sturdy support with holes for adjusting height of cross beam
- With folding carrying handles, wooden feet and running rollers
- Different versions available
Further information and possible accessories can be found in the product sheet
ROMOVER 59.08
wagon mover
ROMPACT 30.09
Portable impact wrench
ROMPACT 30.10
Portable impact wrench
ROMPACT 30.20 E³
Cordless impact screwdriver
For tightening and loosening nuts, sleeper, switch and fishplate bolts.
- Compact, powerful and robust machine
- Adjustable angle design for working in tight spaces
- Simple, ergonomic operation in any work position
- LED lighting
- No transfer of the wrenching torque to operator, low hand arm vibration
Further information and possible accessories can be found in the product sheet
ROPOWER 70.01
combined power generators
ROPOWER 70.02
Hybrid drive unit
Hybrid drive unit for ROGRIND 13.49 Hybrid Rail Head Profile Grinding Machine.
- ROBEL supercaps in the power pack allow for the storage of excess energy from grindstone idling and will release it again during load peaks
- Oil level monitoring
- Especially smooth and low-vibration engine run
Further information and possible accessories can be found in the product sheet
ROPOWER 70.03
Power Supplies
ROPOWER 76.02
High-pressure hydraulic unit, gasoline
For powering Hydraulic Weld Trimmer (ROTRIM 14.10) and Hydraulic Rail Stressors (ROSTRESS 24.70).
- Low space requirement due to compact design
- Quick and easy working
- Automatic changeover from low pressure range to high pressure range
- Keyed connectors prevent misconnection
- Use of a second rail stressor possible due to integrated shut-off valves in the hose kit
Further information and possible accessories can be found in the product sheet
ROPOWER 76.20 E³
High-pressure hydraulic unit battery
For emission-free power for hydraulic weld trimmers (ROTRIM 14.10) and hydraulic rail stressors (ROSTRESS 24.70).
- Low space requirement due to compact design
- Quick and easy working
- Automatic changeover from low pressure range to high pressure range
- Keyed connectors prevent misconnection
- Use of a second rail stressor possible due to integrated shut-off valves in the hose kit
- Approx. 15-20 trimming operations or approx. 7 stressing operations per battery charge when using the 400 Wh battery
- Approx. 28-32 trimming operations or approx. 14 stressing operations per battery charge when using a 800 Wh battery
Further information and possible accessories can be found in the product sheet
ROPULL 24.12
Hydraulic rail pulling and pushing device
For pulling and pushing flat bottom rails quick and without effort.
- Drive via ROTHREAD 43.32 Rail Threader or hand pump and gear pump with cordless screwdriver
- Equipped with 1 hydraulic cylinder, double-acting, with carrying handle and 2 clamping heads as standard
- Compact design
Further information and possible accessories can be found in the product sheet
ROSAW 12.20MSB E³
Battery-powered rail band saw
Cutting rails precisely and safely with patented 4-roller technology.
- Safe and ergonomic
- The saw blade is protected inside the frame, without sparking
- Low-noise, without exhaust emission and grinding dust
- Very high quality of cut
- Stress cracks are avoided
- Speedy replacement of saw blade without tools
Further information and possible accessories can be found in the product sheet
ROSAW 12.72MSB
Mobile rail bandsaw
For cutting rails without sparking in new construction and maintenance.
- Precise and fast cutting due to sturdy machine frame
- Long blade life
- Easy and quick blade change
- Modular design
- Quiet working with low vibration
- Cutting of heavily worn rails is possible due to clamping on rail web
- Operator safety due to cutting without sparks
Further information and possible accessories can be found in the product sheet
ROSHOE 24.08
rail puller
For pulling rails in the ballast.
- For various types of rail up to a rail length of 180 m, depending on the condition of the track
- Can be used for drilled and undrilled rails
- Does not cause impressions or deformations of the rail
Further information and possible accessories can be found in the product sheet
ROSIGN 69.14 SH 2
retaining disc
ROSPIKE 33.25 E³
Battery-powered nail drive machine
ROSTOP 59.10
brake shoe
ROSTRESS 24.70
Hydraulic Rail Stressor
The modular concept for generating neutral rail stress during welding and stressing work.
- Flexibility due to configurable modular system
- Fast installation and dismantling independent of clearance gauge
- Safe and easy operation
- Low weight of the individual components
- Can be driven over when fitted in some instances
- Hydraulic power supply
Further information and possible accessories can be found in the product sheet
ROTAMP 62.05CC
Vertical vibrating tamper
Sleeper tamped within 2 minutes.
- Optimum ballast compaction under the sleeper
- High loading capacity of track bed due to tightly interlocked ballast
- Minimum hand-arm vibration thanks to patented 2-level vibration decoupling
- Cost reduction
- Available in different versions
Further information and possible accessories can be found in the product sheet
ROTAMP 62.05L
Vertical Swing Tamper Light
Tamping sleepers quickly and easily.
- 62.05 Light: In areas difficult to access and on more heavily compacted ballast bed
- 62.05 Light Short: For ergonomic working for shorter operators thanks to 120 mm lower handle
- 62.05 Light Flex: For ergonomic working for operators of different heights, thanks to 5 adjustable heights from standard handle position
- 62.05 Light Slim: Reduced tamping tool diameter for heavily soiled ballast bed
- 62.05 Light Slim Short: 120 mm lower handle and reduced tamping tool diameter
Further information and possible accessories can be found in the product sheet
ROTAMP 62.20L E³
Battery-powered Vertical Tamper
Tamping sleepers quickly and easily, correcting track level defects effectively.
- Reduced tamping time due to optimum ballast compaction under the sleeper with the ROBEL vertical vibration tamping principle
- No damage to ballast or sleepers
- Minimal hand arm vibration thanks to patented 2-level vibration decoupling
- Relieves the operator thanks to low machine weight
- No exhaust fumes, low noise emissions
Further information and possible accessories can be found in the product sheet
ROTHREAD 43.32
Mobile rail transfer machine
For continuous gradual repositioning of rails to the desired track gauge.
- High work performance, especially with long rails
- Automatic adjustment to the track gauge during travel
- Ready for use straight away
- Wide range of use
- User-friendly and safe
Further information and possible accessories can be found in the product sheet
ROTOOL 35.01
Tab wrench
ROTOOL 35.02
Tab wrench
ROTOOL 36.02/04
socket
ROTOOL 37.04
combination wrench
ROTOOL 38.01
support lever
ROTOOL 44.17
Timber sleeper carrying clamp
ROTOOL 44.18
threshold mover
ROTOOL 44.20
Concrete sleeper support clamp
ROTOOL 68.03
Rail tilting device
ROTOOL 69.01
Drivers
ROTOOL 69.02
crowbar
ROTOOL 69.03
mallet
ROTOOL 69.04
track flyram
ROTOOL 69.05
Stuffing pickaxe
ROTOOL 69.06
sleeper hammer
ROTOOL 69.07
Gravel fork
ROTOOL 69.08
Switch mounting lever
ROTOOL 69.09
Scoop made of sheet steel
ROTOOL 69.10
Switch broom
ROTOOL 69.11
Adze
ROTOOL 69.12
Cold-cut chisel
ROTOOL 69.16
Hook screw extractor tool
ROTOOL 69.18
Extraction sleeve
ROTORQUE 86.12+
Torque measuring device
ROTOW 52.18
Towing device
For recovering and transporting rail vehicles with defective wheels or wheel sets.
- Quick assembly and recovery thanks to modular design
- Low weight of individual components
- High carrying capacity
- Lifting technology in cooperation with partner LUKAS Hydraulik GmbH
Further information and possible accessories can be found in the product sheet
ROTRIM 14.10
Hydraulic Weld Trimmer
ROWRENCH 30.73PSM
Hydraulic precision screwdriving machine
Fully hydraulic precision power wrench tightens and loosens every screw connection precisely to the specified torque.
- Measurement with integrated torque wrench
- Self-learning and intuitive controller
- High tightening/loosening torque for rusty rail fastenings and for dismantling screws
- Height-adjustable and foldable guide handles
- Recording of each wrenching process
- Captures wrenching frequency, kilometre marking and wrenching mode
- GPS link for precise information of working position
Further information and possible accessories can be found in the product sheet
ROWRENCH 30.76 E³
Electric Precision Power Wrench
For fully electric tightening or loosening of all screw connections with a very large operating range.
- Ergonomic and sustainable
- Ideally balanced machine due to the telescopic frame
- Up to 5000 wrenching cycles per battery charge (depending on type of track, condition of track, torque required, etc.)
- Intelligent wrenching machine with self-learning and intuitive controls
- Recognizes defective screws and damaged threads, reacts to conditions and regulates further wrenching processes
- High tightening and loosening torque for rusty rail fastenings and for dismantling screws
- Work result fully documented
- High availability of the machine, minimum maintenance effort
Further information and possible accessories can be found in the product sheet
ROWRENCH 30.77
Automated 8-spindle precision screwdriving machine
For simultaneous tightening or loosening of up to 8 rail fastenings in one step.
- Only one operator is required - low personnel costs
- Automated and fast wrenching
- Selection of track type via control panel on the machine
- Detects the screw and positions the wrenching spindle automatically
- With automatic spring clip insertion and extraction (W type track)
- Safe operation thanks to user-friendly remote control
- Dead man‘s switch for transfer travel and working mode
Further information and possible accessories can be found in the product sheet
ROWRENCH 30.82HKS E³
Cordless universal screwdriver
For tightening and loosening nuts, sleeper, hook and fishplate bolts.
- Even screwing repetitions thanks to adjustable torque
- Selection between two gears
- Fast changeover to maximum torque without changing the torque setting
- Low maintenance costs
- User-friendly and ergonomic wrenching machine
- Flexible use
- LED lighting
Further information and possible accessories can be found in the product sheet
ROWRENCH 30.82HKS
Universal screwdriver
For tightening and loosening nuts and sleeper, hook and fishplate bolts.
- Uniform repat wrenching due to adjustable torque
- Selection between two gears
- Fast changeover to maximum torque without changing the torque setting
- Low maintenance costs
- User-friendly and ergonomic wrenching machine
- Flexible use
- LED lighting
Further information and possible accessories can be found in the product sheet
ROWRENCH 30.82RKS
Universal screwdriver
For tightening and loosening nuts and sleeper, hook and fishplate bolts.
- Fast wrenching, optimum result
- Intuitive setting of torque
- Automatic detection of stiffness when unscrewing avoids motor stop
- User-friendly and ergonomic wrenching machine
- Low weight
- Long service life
- Use of one-piece and articulated sockets possible
- Wide range of applications and flexible
- LED lighting
Further information and possible accessories can be found in the product sheet
ROWRENCH 30.83
Combined screwdriver and drill
For all drilling and wrenching tasks that arise in track construction, particularly suitable for dowel repairs.
- Reliable dowel repair
- Flexible use on tracks, switches and other areas
- Powerful and robust machine
- No transfer of the wrenching torque to the operator
- Foldable and height-adjustable guide handles
- Optionally with depth stop
Further information and possible accessories can be found in the product sheet